Brushed Rose Gold Concealed Shower Set with 300 mm Rainfall Head

Brushed Rose Gold Concealed Shower Set with 300 mm Rainfall Head

A 400 mm wall arm carries a round 300 mm rainfall head that swivels through 360 degrees. This concealed shower set pairs a wide flat diffuser with a compact hand shower on a 190 mm G1/2 hose, the whole assembly finished in satin rose gold.

The body is brass, reinforced with a stainless steel alloy on the connecting parts. The internal ceramic cartridge blends hot and cold smoothly and holds that accuracy over years of use.

Two separate handles run the changeover between handset and overhead. Because each outlet is plumbed on its own line, both can be used simultaneously with no pressure lost from either.

The 120 mm deep concealed housing goes into the stud wall before tiling. Only the finishing plates and outlets stay visible, so the shower wall reads as a clean surface.

Technical specification

• Materials: Brass and stainless alloy
• Cartridge material: Ceramic
• Height adjustable: Yes
• Rainfall head diameter: 300 mm (12 in)
• Wall arm length: 400 mm
• Concealed housing depth: 120 mm
• Connection: G1/2 thread
• Outlet centres: 115 mm

What water pressure does a concealed shower set need?

One to 1.5 bar is the practical minimum for this kind of installation. A typical mains-fed UK supply runs between 2 and 5 bar, which is comfortably enough for both outlets at once. On a low-pressure gravity system, a shower pump fitted upstream will restore the flow a 300 mm head needs.